42
To Use as a Kitchen Timer:
Example: To count down 5 minutes.
Step 1.
Touch once
• Touch
Timer/Clock
once.
Step 2.
Swipe
• Set time by touching “+”/“-” or
swipe the slider bar to 5 minutes.
Step 3.
• Touch
Start
.
Time will count down without
oven operating.
To Set Stand Time:
Example: To cook at 600 W for 3 minutes with stand
time of 5 minutes.
Step 1.
Touch 3 times.
• Touch
Micro Power
until the
desired power level appears in the
display window.
Step 2.
Swipe
• Set cooking time, touching “+”/“-”
or swipe the slider bar to
3 minutes.
Step 3.
Touch once
• Touch
Timer/Clock
once.
Step 4.
Swipe
• Set stand time, touching “+”/“-” or
swipe the slider bar to 5 minutes.
Step 5.
• Touch
Start
.
Cooking will start. After cooking,
stand time will count down
without oven operating.
Timer Feature
This feature allows you to program the oven as a kitchen
timer. It can also be used to program a standing time after
cooking is completed and/or to program a delay start.
To Set Delay Start:
Example: To delay the start of cooking for 5 minutes,
and cook at 600 W for 3 minutes.
Step 1.
Touch once
• Touch
Timer/Clock
once.
Step 2.
Swipe
• Set delay time by touching “+”/“-”
or swipe the slider bar to
5 minutes.
Step 3.
Touch 3 times
• Touch
Micro Power
until the
desired power level appears in the
display window.
Step 4.
Swipe
• Set cooking time, touching “+”/“-”
or swipe the slider bar to 3 min-
utes.
Step 5.
• Touch
Start
.
Delay time will count down. Then
cooking will start.
NOTES:
1. When each stage
fi
nishes, a two-beep signal sounds. At
the end of the program, the oven will beep
fi
ve times.
2. If oven door is opened during the Standing Time, Delay
Start or Kitchen Timer, the time in the display window will
continue to count down.
3. This feature is only available for Microwave, Grill (without
preheating), Combination, Timer, Convection (without
preheating), Steam and 300 W + Steam feature.
4. Delay Start/Standing Time cannot be programmed be-
fore/after any Auto program (such as popcorn, inverter
turbo defrost, auto cook and sensor cook feature). This
is to prevent the standing temperature of the food from
rising before defrosting or cooking begins. A change in
the starting temperature could cause inaccurate results
and/or food may deteriorate.
5. When using Standing time or Delay Start, it’s up to 2
power stages.
6. The maximum programmable time of Standing Time,
Kitchen Time or Delay Time is up to 90 minutes.
CAUTION:
If oven lamp is lit while using the timer feature, the
oven is incorrectly programed. Stop oven immediately
and re-read instructions.
F0003BH71CP_OI_Eng_00_160121.indd sec42
F0003BH71CP_OI_Eng_00_160121.indd sec42
2016/1/22 9:14:01
2016/1/22 9:14:01
