Read Before Using - 13
Using the Buttons
10
11
9
9. Process indicator
- This indicator shows the current process
of the programme. The process consists
of wash , rinse
, spin , and drain
.
- The light turns off when the programme
is finished.
10. Remaining time indicator
- This indicator shows the approximate
time until the programme finishes. For
example, ‘2:05’ means 2 hours and
5 minutes.
- The time is calculated from the weight
of the laundry measured when washing
starts.
11. Steam indicator
The Steam function becomes
operational when the Wrinkle-care,
Allergy-care, Shirts, Daily and Refresh
programmes are used. When you select
these programmes, the Steam symbol
lights up.
Moreover, during Wrinkle-care and
Refresh programmes, the Steam symbol
flashes on and off, indicating that the
Steam operation is under way.
Unlocking the door
The door automatically locks while in use
and the symbol is shown in locked state.
A click will be heard when the door locks or
unlocks.
Note
-If the appliance is switched off with
the door locked, or if there is a power
interruption, the door remains locked
until the appliance is turned on again.
-This is different from the child safety
lock. (See page 27.)
Press the Start button to unlock the
door during operation.
After approximately 1 minute, the
drum stops spinning and the door will
automatically unlock.
If the door does not open, see page 31.
CAUTION
If you have to unlock the door
mid-programme, make sure that
water from the drum does not
overflow onto the floor.
Water and soap suds may come out
of the door and the door opening. You
may need a towel to soak them up.
Display on NA-140VS4
NA-140_168_148VS4_WGB_En.indb 13
2013/11/06 19:06:37
