Panasonic MINAS-BL GU series, Operating Instructions Manual

Page: 17 / 21

English
B5 B6
Contents of Name Plate
Installation (Amplifier)
Environmental Conditions
Item Conditions
Ambient temperature 0 ˚C to 40 ˚C (free from freezing)
Ambient humidity 20 % to 85 %RH (free from condensation)
Storage temperature
–20 ˚C to 65 ˚C (Max.temperature guarantee: 80 ˚C for 72 hours free
from condensation)
Storage humidity 20 % to 85 % RH (free from condensation)
Vibration Not greater than 5.9 m/s
2
, 10 Hz to 60 Hz
Altitude Not greater than 1000 m
Mounting Direction and Spacing
Installation of brushless amplifier
• Install the product up and down correctly in the direction shown below.
• Tightening torque of the product mounting screw should be selected appropriately so
as not to be loose or damaged considering the strength of the screw to be used and
the material of the installation destination.
Recommended tightening torque (To install to steel plate with steel screw):
M4 0.8 N ・ m
to
1.2 N ・ m
• In order to cool effectively, please secure ambient space.
• Measure the ambient temperature 50 mm away from the side and bottom of the
brushless amplifier.
If measurement can not be made at 50 mm distance, including when using brushless
amplifiers side by side, measure at the midpoint of the gap between the obstacle and
the brushless amplifier or the gap between the brushless amplifier and the adjacent
brushless amplifier.
When the motor is driven, the brushless amplifier generates heat, but be sure to keep
the temperature within the range including the
heat generation.
• Install in an environment where the polution
degree around the product is 2 or less, such
as putting it in a control panel with IP 54 or
higher.
。
Installation Place
1) Install the amplifier in a control panel enclosed in noncombustible material and placed
indoor where the product is not subjected to rain or direct sunlight. The products are not
waterproof.
2) Where the products are not subjected to corrosive atmospheres such as hydrogen sul-
fide, sulfurous acid, chlorine, ammonia, sulfur, chloric gas, sulfuric gas, acid, alkaline
and salt and so on, and are free from splash of inflammable gas.
3) Where the motor is free from grinding oil, oil mist, iron powder or chips.
4) Well-ventilated and low humidity and dust-free place.
5) Vibration-free place.
6) Do not use benzine, thinner, alcohol, acidic cleaner and alkaline cleaner because they
can discolor or damage the exterior case.
Amplifier
Nameplate
Serial number
Ex.: P 1 8 0 4 0 0 0 1 ＊
Consecutive number
Month of production
Year of production
(Lower 2 digits of AD year)
Production date
Ex.: 2 0 1 8 0 4 0 1
Day of production
Month of production
Year of production
(AD year)
Model No.
Input/output voltage
Input/output phase
Rated input/output current
Input/output frequency
Rated output
Model No.
Voltage
INPUT OUTPUT
Phase
F.L.C
Freq.
Power
200-240 V
1φ/3φ
0.7 A/0.35 A
50/60 Hz 0-240 V
3φ
0.6 A
0-267 Hz
50 W
Ser.No.
P18040001G
BRUSHLESS AMPLIFIER
MBEU5A5AAV
Made in China
20180401
日本 大阪 原产地：中国
无刷电动机驱动器
松下电器产业株式会社
Example of the nameplate
Vertical
Location of fixing screw
Location of fixing screw
Input power supply 1: Single phase AC100 to 120 V
5: Single phase/3-phase AC200 to 240 V
MBEU 5A 5 A A V
V: speed control
Function 1 A: Standard
Function 2 A: Standard
(without RS485 communication)
Output
5A: 50 W
9A: 90 W
1E: 130 W
Compact geared
motor drive
GU series
Model designation
Installation (Amplifier)