General safety precautions
Remove the dust and gas with a dust collector or exhauster. Depending on the material of
the workpiece to be marked, dust or gas, which can be harmful for the human body and
this product, may be generated.
(1)
(2)
(1) Protective enclosure
(2) Dust collector
When using an assist gas for laser processing, take safety measures to protect operators
from exposure, ignition, toxic effects, excess or lack of oxygen.
To carry this product, wear non-slip gloves and safety shoes. Hold this product with both
hands. Do not transport this product by holding the cables and connectors. In case the unit
falls down, it may cause injury.
LP-RC/LP-RF/LP-RV: Carry the controller of this product series with two persons. Lifting or
carrying the product without assistance can cause muscle strain or back injury.
Install this product in a stable place without vibration and shock. In case the unit falls down,
it may cause injury.
LP-RF/LP-RV: Do not touch the surface of the laser head during and right after operation.
It becomes hot and may cause burn injuries.
ME-NAVIS2-OP-1
7
