Panasonic KXFC265E Page 55 Operating Instructions Manual Download

Page: 55 / 76

10.1 Report messages

To indicate the unit’s fax transmission/reception status, one of the following messages will be printed on the sending
and journal reports (page 30).

Message

Code

Cause & Solution

COMMUNICATION ERROR

40-42
46-72

A transmission or reception error occurred. Try
again or check with the other party.

43
44

A line problem occurred. Connect the telephone line
cord to a different jack and try again.

An overseas transmission error occurred. Try using
the overseas mode (feature #23 on page 43).

DOCUMENT JAMMED

-----

Remove the jammed document (page 65).

ERROR-NOT YOUR UNIT

53
54
59
70

A transmission or reception error occurred because
of a problem with the other party’s fax machine.
Check with the other party.

JUNK FAX PROH. REJECT

-----

The junk fax prohibitor feature of this unit rejected
fax reception.

MEMORY FULL

-----

The memory is full of received documents due to a
lack of recording paper, a lack of ink film or a
recording paper jam. Install paper (page 17), install
ink film (page 15) or remove the jammed paper
(page 64).

NO DOCUMENT

-----

The document was not fed into the unit properly.
Re-insert the document and try again.

OTHER FAX NOT RESPONDING

-----

The other party’s fax machine is busy or has run out
of recording paper. Try again.

The other party’s fax machine rang too many times.
Send the fax manually (page 30).

The other party’s machine is not a fax machine.
Check with the other party.

The number you dialled is not in service.

PRESSED THE STOP KEY

-----

R M

STOP

was pressed, and fax transmission or

reception was cancelled.

-----

Fax transmission or reception was successful.

10.2 Display messages

To indicate the unit’s status, one or more of the following messages will appear on the display.

10.2.1 Base unit

Display

Cause & Solution

“

BACK COVER OPEN

”

The back cover is open. Close the back cover firmly.

“

BUSY

”

The cordless handset you tried to call is in use.

The cordless handset you are calling is too far from the base unit.

“

CALL SERVICE

”

There is something wrong with the unit. Contact our service personnel.

10. . Help

10. Help

Summary of Contents for KXFC265E













































































Search results

Summary of Contents for KXFC265E

Reviews:

Related manuals for KXFC265E

Brands by name

Popular brands

Panasonic KXFC265E, Operating Instructions Manual

Search results

Summary of Contents for KXFC265E

Reviews:

Related manuals for KXFC265E

Brands by name

Popular brands