Panasonic KXFC265E Page 57 Operating Instructions Manual Download | Manualshive

Page: 57 / 76

background image

Display

Cause & Solution

“

POLLING ERROR

”

R

The other party’s fax machine does not support polling. Check with the other
party.

“

RECORDING ERROR

”

R

The greeting message you recorded was under 1 second long. Record a
longer message.

“

REDIAL TIME OUT

”

R

The other party’s fax machine is busy or has run out of recording paper. Try
again.

“

REMOVE DOCUMENT

”

R

The document is jammed. Remove the jammed document (page 65).

R

Press

M

STOP

N

to eject the jammed paper.

“

SERIAL ERROR

”

R

There is something wrong with the unit. Contact our service personnel.

“

TRANSMIT ERROR

”

R

A transmission error occurred. Try again.

R

If you send a fax overseas, try the following:
– Use the overseas transmission mode (feature #23 on page 43).
– Add 2 pauses at the end of the telephone number or dial manually.

“

UNIT OVERHEATED

”

R

The unit is too hot. Stop using the unit for a while and let the unit cool down.

10.2.2 Cordless handset

Display

Cause & Solution

“

Error

”

R

Recording was too short. Try again.

“

Failed

”

R

Phonebook copy failed. Confirm the destination unit is in standby mode and
try again.

“

Incomplete

”

R

The destination unit’s phonebook memory is full. Erase the unnecessary
phonebook items from the destination unit and try again.

“

Memory Full

”

R

The cordless handset’s phonebook memory is full. Erase unnecessary
items (page 25).

“

Messages Full

”

R

There is no room left in the memory to record voice messages. Erase
unnecessary messages (page 38, 39).

“

No link. Reconnect AC

adaptor.

”

R

The cordless handset has lost communication with the base unit. Move
closer to the base unit and try again.

R

Unplug the base unit’s mains lead to reset the unit. Reconnect the mains
lead and try again.

R

The cordless handset’s registration may have been cancelled. Re-register
the cordless handset (page 50).

“

Use rechargeable

battery.

”

R

A wrong type of battery such as Alkaline or Manganese was inserted. Use
only the rechargeable Ni-MH battery noted on page 5, 11.

“

You must first

subscribe to Caller
ID.

”

R

You must subscribe to use Caller ID service. Once you receive caller
information after subscribing to a Caller ID service, this message will not be
displayed.

“

Press 5sec on base,

then put on charger

”

R

The cordless handset is not registered to the base unit. Press

M

LOCATOR

N

( ) on the base unit for about 5 seconds, then place the

cordless handset on the base unit or charger. The cordless handset will be
registered to the base unit.

10.3 When a function does not work

If you still have difficulties after following the instructions in this section, reset the unit. Disconnect the mains lead and
turn OFF the cordless handset. Reconnect the mains lead and turn ON the cordless handset.

57

10. Help

«
...
55
56
57
58
59
...
»

Summary of Contents for KXFC265E













































































Reviews:

No comments

Related manuals for KXFC265E

Brand: Janome Pages: 8

Brand: Oki Pages: 28

Brand: C.P.Bourg Pages: 142

EXPANDER 750 PROPANO

Brand: KLINDEX Pages: 60

Brand: Neopost Pages: 16

Brand: Kärcher Pages: 39

Brand: Janome Pages: 52

Brand: Geemarc Pages: 84

Brand: Canon Pages: 65

Brand: Canon Pages: 17

Brand: Canon Pages: 16

Brand: Canon Pages: 185

i-Sensys FAX-L3000

Brand: Canon Pages: 8

Brand: Canon Pages: 2

Brand: Canon Pages: 213

Brand: Canon Pages: 236

FAX-L380S Series

Brand: Canon Pages: 176

Brand: Canon Pages: 187

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands