![background image](http://html.mh-extra.com/html/panasonic/kxf-193c/kxf-193c_operating-instructions-manual_275298059.webp)
Page 4-1
193C-E-OMA04-A01-00
Chapter
4
PRODUCTION SETTINGS
PRODUCTION SETTINGS
Production settings
• Production settings is the mode for requisite settings for production, and for motion
check.
• This chapter describes the following items.
Squeegee open/close -- This is used to open and close squeegee.
PCB transfer -------------- You can check board transport between conveyors, and between ma-
chines.
Mask cleaning ------------ This is used to clean mask.
Counter reset ------------- Cleaning count and paste count (the number of times of solder feed) can
be reset.
• You can operate to enter production settings from main menu.
Start the first operation for each item from here.
Press
Product
config
on “Main menu” screen.
Then “Production config menu” screen appears. After that, operate according to each item.
Product
config
Summary of Contents for KXF-193C
Page 2: ......
Page 28: ...Page 28 193C E OMA00 A04 01 MEMO ...
Page 64: ...Page 4 6 193C E OMA04 A01 01 MEMO ...