Panasonic KXF-193C Operating Instructions Manual Download Page 42

Page: 42 / 120

Page 2-4

193C-E-OMA02-A01-00

Touch Panel

2-2-2

Switch Types and Operation Method

You can operate this machine mostly by pressing a switch on screen softly.

a) Selection switches

• Choosing item

1) Press the item you want to choose

with your finger.

The screen of the chosen item is displayed.

Main menu icons belong to selection switches.

b) Arrow switches

-------

Page turning switches

Page of displayed screen is turned.

-------

Move switches

Cursor moves in the direction of the arrow .
(Not all the cursors are arranged as shown left.)

c) Mark on switch

-------

Repeat mark (at the upper right)

While the switch with this mark is pressed, its function continues to be
executed.

-------

Unlock mark (at the upper left)

The switch with this mark is used while

is pressed.

(Vertical direction)

(Horizontal direction)

UNLOCK

Summary of Contents for KXF-193C

























































































































Search results

Summary of Contents for KXF-193C

Reviews:

Panasonic KXF-193C, Operating Instructions Manual, Page: 42 / 120

Search results

Summary of Contents for KXF-193C

Reviews: