Page 6-13
6
SETTING PRODUCTION
MA
TERIALS
193C-E-OMA06-A01-01
To the next page
Supplying Cleaning Paper
4.
Remove the paper tubes of paper roll.
1 Move the paper tube of paper roll to the right.
2 After making sure the flange separates from
the projection at the left side, remove the paper
tube. (Remove both the paper tubes on the
take-up side and the supply side.)
∗
Do not dispose of the paper tube on the supply
side because it will be used as the paper tube
on the take-up side later.
5.
Fit the flanges to a new paper roll and
fit it on the supply side (lower side).
6.
Fit the flanges to the paper tube re-
moved at the step 4) and fit it on the
take-up side (upper side).
7.
Remove the cover of solvent nozzle
part.
∗
Remove the two screws, then remove the
cover.
Move the paper tube untill it
separates from this projection.
153C-006P
153C-007P
NOTICE
If the paper is not taken up properly because the paper tube fit to the flanges
on the take-up side races, stop using that paper tube and use the accompany-
ing aluminum tube.
153C-006P
Summary of Contents for KXF-193C
Page 2: ......
Page 28: ...Page 28 193C E OMA00 A04 01 MEMO ...
Page 64: ...Page 4 6 193C E OMA04 A01 01 MEMO ...
