manualshive.com logo in svg

Panasonic KX-VC300CN, Installation Manual

Share
Download
Panasonic KX-VC300CN Installation Manual Download Page 4

Notations

•

Windows

®

 refers to the Microsoft

®

 Windows operating system.

•

Windows XP refers to the Microsoft Windows XP operating system.

•

Windows 7 refers to the Microsoft Windows 7 operating system.

Trademarks

•

Microsoft, Windows, and Internet Explorer are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.

•

HDMI is a trademark or registered trademark of HDMI Licensing LLC in the United States and other
countries.

•

Polycom

®

 is a trademark owned by Polycom, Inc. in the US and other countries.

•

All other trademarks identified herein are the property of their respective owners.

Licences

•

This product is licensed under the AVC Patent Portfolio License. This license permits the end user to
perform, for personal and non-commercial use, only the following actions:

–

Encode video in compliance with the AVC Standard (below, "AVC Video").

–

Decode AVC Video that was encoded by a consumer engaged in both personal and non-commercial
activity.

–

Decode AVC Video obtained from a video provider licensed to provide AVC Video.

Additional information may be obtained from MPEG LA, LLC. See http://www.mpegla.com.

•

This product incorporates G.722.1 and G.722.1 Annex C licensed by Polycom

®

.

•

This product incorporates Qt library licenced by Digia Plc. Please read "EULA" of system settings of this
product.

Open Source Software

Parts of this product use Open Source Software supplied based on the conditions of the Free Software
Foundation’s GPLs and/or LGPLs and other conditions. Relevant conditions apply to this software. Therefore,
please read license information about GPLs and LGPLs, and "License Info." of system settings of this product
before using this product. Also, some software parts of this product are licensed under the MOZILLA PUBLIC
LICENSE (MPL). At least three (3) years from delivery of products, Panasonic will give to any third party who
contacts us at the contact information provided below, for a charge of no more than the cost of physically
distributing source code, a complete machine-readable copy of the corresponding source code and the
copyright notices covered under GPL, LGPL, and MPL. Please note that software licensed under GPL, LGPL,
and MPL is not under warranty.

Contact Information
http://www.panasonic.net/corporate/global_network/

4

Installation Manual

Introduction

Summary of Contents for KX-VC300CN

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands