manualshive.com logo in svg

Panasonic KX-VC300CN, Installation Manual

Share
Download
Panasonic KX-VC300CN Installation Manual Download Page 34

6.3  Displaying the
Connection Status

You can confirm the connection status of the network
and peripheral devices.

1.

Press 

[Status]

.

•

The connections status screen is displayed. An

"X"

 mark is displayed next to any network or

peripheral devices connection that is not in
normal operation or not connected.

Example: The Boundary Microphone connection is
not normally operating.

•

"MIC"

 displays the connection status of the

Boundary Microphone or headset only. The
connection status of general-purpose
microphones is not displayed.

•

If the MIC detection setting has been disabled
through system settings, the connection status
of the Boundary Microphone or headset will not
be displayed. For details on how to change MIC
detection settings, refer to the User Manual.

2.

Press 

[Back]

.

•

The display returns to the screen in use before
the connections status screen was viewed.

34

Installation Manual

6 Settings and Confirmation

Summary of Contents for KX-VC300CN

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands