manualshive.com logo in svg

Panasonic KX-VC300CN, Installation Manual

Share
Download
Panasonic KX-VC300CN Installation Manual Download Page 3

as you, you can make a video conference call by specifying only the SIP user name.

*1

 For information about

supported SIP servers, contact your dealer.

*1

To make a video conference call using a SIP URI or SIP user name, you must first configure SIP settings. For details about SIP
settings, refer to the User Manual.

Enhanced Features through the Use of Activation Keys

By using an activation key (sold separately), you can upgrade the features of the KX-VC300 (Page 14). After
you upgrade the features, the KX-VC300 can initiate 3-party/4-party video conference calls and send images
in Full HD resolution. Features enabled through activation keys are available even after performing a system
initialisation.

Connection to non-Panasonic Video Conference Systems

You can connect to a non-Panasonic video conference system and have a 2-party video conference call.

*1

*1

For details about the types of non-Panasonic video conference systems you can connect to, contact your dealer.

MCU Connection

By connecting to an MCU (multipoint control unit), you can make multiple-party video conference calls with 5
or more parties, rather than the normal maximum of 4 parties.

*1

*1

For details about the types of MCUs you can connect to, contact your dealer.

Installation Manual

3

Introduction

Summary of Contents for KX-VC300CN

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands