![background image](http://html.mh-extra.com/html/panasonic/kx-vc300cn/kx-vc300cn_user-manual_262533089.webp)
–
"Motion"
(default): Prioritise smooth
movement.
–
"Sharpness"
: Prioritise image quality.
Note
•
If you are using the KX-VC300,
"Sharpness"
can only be selected after
purchasing an activation key card
(KX-VCS401) to enable sending images in
Full HD resolution (Page 108).
•
If one of the other parties is using a software
version older than 2.30 (not including 2.30),
"Motion"
will be selected.
•
If
"Max Resolution"
is set to
"HD"
, and
"Video Quality"
is changed from
"Motion"
to
"Sharpness"
, the setting for
"Max Resolution"
is automatically
changed to
"Auto"
.
•
The value that you select here does not
influence the unit’s operation when you
connect to an MCU or non-Panasonic video
conference system.
"Max Resolution"
: Press
[Enter]
and use
[
]
[
]
to select the maximum display resolution of the
main video camera and sub video camera used
during a video conference call.
–
"Full HD"
: Maximum resolution: 1920
´
1080
(This mode switches the display resolution
according to the condition of the network.)
–
"HD"
(default [for KX-VC300]): Maximum
resolution: 1280
´
720
(This mode switches the display resolution
according to the condition of the network.)
–
"Auto"
(default [for KX-VC600]): This mode
selects either
"Full HD"
or
"HD"
according to
the available bandwidth.
Note
•
Selecting
"Auto"
or
"HD"
is recommended.
•
If you are using the KX-VC300,
"Auto"
or
"Full HD"
can only be selected after
purchasing an activation key card
(KX-VCS401) to enable sending images in
Full HD resolution (Page 108).
•
When
"Full HD"
is selected, if the other
party has a low bandwidth, the display
resolution may be lower than when
"HD"
or
"Auto"
is selected.
•
When making a 3-party video conference
call, the main video camera will be
automatically set to
"HD"
, even if you have
specified
"Full HD"
.
•
When making a 4-party video conference
call, the main video camera and sub video
camera will be automatically set to
"HD"
,
even if you have specified
"Full HD"
.
•
When
"Video Quality"
is set to
"Sharpness"
, only
"Full HD"
and
"Auto"
can be selected.
•
The value that you select here does not
influence the unit’s operation when you
connect to an MCU or non-Panasonic video
conference system.
"Quality of Service"
: Use
[
][
]
to select
between prioritising sound or images when
bandwidth is low or the network is congested.
–
"Audio"
(default): When bandwidth is low
sound quality is prioritised, and when the
network is congested sound disturbance is
reduced.
–
"Video"
: Even when bandwidth is low or the
network is congested, image quality is
prioritised.
Note
•
The value that you select here does not
influence the unit’s operation when you
connect to an MCU or non-Panasonic video
conference system.
•
If one of the other parties is using a software
version older than 2.30 (not including 2.30),
"Audio"
will be selected.
"Audio only mode"
: Use
[
][
]
to select
whether to use only audio communication
(Audio-only mode) in periods of network
congestion. When in Audio-only mode, your image
is not sent to the other party. Instead, a blue screen
is sent.
–
"ON"
: Communication will become audio only
if there is network congestion.
–
"OFF"
(default): Communication will not
become audio only, even if there is network
congestion.
Note
•
To select
"ON"
,
"Quality of Service"
must
be set to
"Audio"
.
•
Contents cannot be shared while in Audio
only mode.
•
The value that you select here does not
influence the unit’s operation when you
connect to an MCU or non-Panasonic video
conference system.
•
When one of the other parties is using a
software version older than 2.30 (not
User Manual
89
Contacts and Settings
Summary of Contents for KX-VC300CN
Page 141: ...User Manual 141 Notes ...