Message
Cause and Solution
Received remote control ID
(
n1
). The unit current setting
is (
n2
).
Press [Home] button using
the correct remote control, or
setup remote control as
follows.
1. Press [.] and [#] at the same
time.
2. Within 2 seconds, press
[
n2
].
3. Press [Home] to finish, this
message will disappear.
If this message will not
disappear, please check the
batteries in your remote
control and try again.
Note
•
The remote control ID
of the remote control
(
1
/
2
/
3
) is represented
by
n1
.
•
The remote control ID
of the unit (
1
/
2
/
3
) is
represented by
n2
.
•
The remote control IDs of the unit and remote control do not match.
→
Follow the on-screen instructions to change the remote control ID of the
remote control to match that of the unit.
→
If you cannot change the remote control ID of the remote control,
contact your dealer.
→
If multiple remote controls with assigned IDs will be used close together
or if you do not want this message to be displayed, select
"OFF"
for
"Check ID mismatch"
The address is invalid.
•
The IP address contains an invalid value.
→
Enter the IP address correctly. The correct format is
XXX.XXX.XXX.XXX (dotted format decimal notation).
If the IP address contains 1 or 2 digit numbers, enter these numbers as
they are. Do not enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
Multicast or broadcast addresses cannot be used.
•
The MCU’s conference room number@IP address contains an invalid
value.
→
Enter the MCU’s conference room number@IP address correctly.
Check the address.
•
The IP address of the other party is the same as your own IP address.
→
Register the correct IP address.
•
In a multiple-party video conference call, one or more of the parties is
using the same IP address.
→
Register the correct IP address.
User Manual
133
Additional Information
Summary of Contents for KX-VC300CN
Page 141: ...User Manual 141 Notes ...