manualshive.com logo in svg

Panasonic KX-VC300CN, User Manual, Page: 29 / 142

Share
Download
Panasonic KX-VC300CN User Manual Download Page 29

Video Conference Call Screen

A

D

F

B

C

E

G

Other party’s information

When registered in the contact list: The other party’s name/group name is displayed.
When not registered in the contact list: The other party’s IP address, SIP URI (SIP user name@SIP domain
name), host name (e.g., www.example.com), H.323 extension, H.323 name, MCU’s conference room
number@IP address, or MCU’s SIP user name@IP address is displayed. If the other party uses the same
SIP domain as you, only the SIP user name, and not the SIP URI, is displayed.

Video Image

Displays the other party’s video, your own video, or video from the secondary video input such as a
computer display or a sub video camera (Page 68, Page 74).

Subscreen

Depending on the screen layout, your own video or the other party’s video is displayed here (Page 45,
Page 47, Page 50).

Duration

Displays the duration of the current video conference call.

Note

•

99h59m is displayed for the duration even if the length of the video conference call exceeds 100
hours.

Guide

Displays operations you can perform with the remote control.

Network Status Indication

The number of antennas in the icon indicates differing levels of network congestion.
The icon changes as follows:
0 bars (

): The network is very congested.

1 bar (

): The network is congested.

2 bars (

): The network is slightly congested.

3 bars (

): The network is not congested.

Note

•

If the icon shows only 0–1 bars continuously, contact your network administrator.

•

During multiple-party video conference calls, the icon is displayed on each site screen, but not on
your own image.

User Manual

29

Preparation

Summary of Contents for KX-VC300CN















































































































































Reviews:

No comments