Making Remote Control
Settings
You can specify a remote control ID from 1, 2, or 3 for
both the remote control and the unit. The unit responds
to signals from any remote control with the same remote
control ID as itself. If you do not specify an ID, the unit
responds to signals from all remote controls. You can
confirm the remote control ID for the unit on the Home
screen (Page 29).
1.
Press
[Menu]
.
•
The Menu screen is displayed.
2.
Use
[
][
]
to select
"Settings"
and press
[Enter]
.
•
The system settings screen is displayed.
3.
Press
[
]
.
•
The second page is displayed.
4.
Use
[
][
]
to select
"Remote Ctrl ID"
and press
[Enter]
.
•
The remote control settings screen is displayed.
5.
Use
[
][
]
to select the following items for input:
"Remote ID enable"
: Use
[
][
]
to select
"ON"
or
"OFF"
(default).
•
When
"ON"
is selected, you can set a specific
remote control ID for the unit.
•
When
"OFF"
is selected, the unit will respond
to all remote controls.
"Remote control ID"
: Use
[
][
]
to select a
remote control ID (
"ID1"
[default]/
"ID2"
/
"ID3"
) for
the unit.
"Check ID mismatch"
: Use
[
][
]
to select
"ON"
(default) or
"OFF"
.
•
When
"ON"
is selected, if the unit receives a
signal from a remote control that has an ID
different from the one specified on the Home
screen, a warning is displayed. Follow the
procedures on the screen to change the remote
control ID.
•
When
"OFF"
is selected, even if the unit
receives a signal from a remote control that has
an ID different from the one specified, no
warning is displayed on the Home screen.
Note
•
If multiple remote controls with assigned
IDs are being used close together, it is
recommended that you select
"OFF"
for
"Check ID mismatch"
.
6.
Press
[G]
.
•
A dialog box to confirm the saving of settings is
displayed.
7.
Use
[
][
]
to select
"Yes"
and press
[Enter]
.
8.
When "Remote ID enable" is set to
"ON" (Page 85):
The dialog box for changing the ID of the remote
control is displayed. Proceed to step
9
.
Note
•
While the dialog box is displayed, video
conference calls cannot be received.
When "Remote ID enable" is set to
"OFF" (Page 85):
The system settings screen is displayed. Press
[Home]
to return to the Home screen.
Document Version 2011-04
Operating Manual
85
Contacts and Settings