![background image](http://html1.mh-extra.com/html/panasonic/kx-ut248-b/kx-ut248-b_administration-manual_4137426081.webp)
Phone User Interface
Reference
Configuring the Network Settings of the Unit (Page 19)
Configuration File Reference
DNS2
Description
Specifies the IP address of the secondary DNS server.
Note
•
This setting is available only when
[Connection Mode]
is set
to
[Static]
.
Value Range
Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0",
"255.255.255.255", "127.0.0.1", etc.)
Default Value
Not stored.
Phone User Interface
Reference
Configuring the Network Settings of the Unit (Page 19)
Configuration File Reference
4.3.2 Ethernet Port Settings
This screen allows you to change the connection mode of the Ethernet ports and the VLAN settings.
Note
•
When you change the settings on this screen and click
[Save]
, after the message "Complete" has been
displayed, the unit will restart automatically with the new settings applied. If a unit is on a call when
"Complete" has been displayed, the unit will restart after the unit returns to idle.
•
Incorrect settings may cause a network failure. In such a case, you cannot access the Web user
interface anymore. To access it again, you need to correct the speed/duplex settings or perform IP
Document Version 2012-06
Administrator Guide
81
4.3.2 Ethernet Port Settings
Summary of Contents for KX-UT248-B
