Panasonic KX-UT248-B, Administration Manual

Page: 43 / 306

Download Timing Explanation
None (prohibited) If you want to prohibit units from changing their settings by downloading
configuration files, you can enable this function from the Web user interface.
The following operations will be prohibited:
–
Pre-provisioning
–
Provisioning at startup
–
Provisioning at regular intervals
–
Provisioning by sending a NOTIFY message
•
In the configuration file:
–
Add the line,
PROVISION_ENABLE="N"
.
•
In the Web user interface:
–
Click the [Maintenance] tab, click [Provisioning Maintenance] ,
and then select [No] for [Enable Provisioning] .
•
To enable provisioning again, in the Web user interface:
–
Click the [Maintenance] tab, click [Provisioning Maintenance] ,
and then select [Yes] for [Enable Provisioning] .
2.2.5 Provisioning Server Setting Example
This section gives an example of how to set up the units and provisioning server when configuring 2 units with
configuration files. The standard configuration files and the master configuration file are used in this example.
Conditions
Item Description/Setting
Provisioning server FQDN prov.example.com
Units’ MAC addresses •
0080F0111111
•
0080F0222222
URL of the configuration files Configure the following 2 settings either by pre-provisioning or through the
Web user interface. The values of both settings must be the same.
•
CFG_STANDARD_FILE_PATH="http://prov.example.com/
Panasonic/Config{MAC}.cfg"
•
CFG_MASTER_FILE_PATH="http://prov.example.com/
Panasonic/ConfigCommon.cfg"
Directory on the provisioning
server containing the
configuration files Create the "Panasonic" directory just under the HTTP root directory of the
provisioning server.
File name of configuration
files Store the following configuration files in the "Panasonic" directory.
•
Contains the common settings for the 2 units:
–
ConfigCommon.cfg
•
Contains the settings unique to each unit:
–
Config0080F0111111.cfg
–
Config0080F0222222.cfg
Document Version 2012-06 Administrator Guide 43
2.2.5 Provisioning Server Setting Example