manualshive.com logo in svg

Panasonic KX-UT248-B, Administration Manual, Page: 110 / 306

Share
Download
Panasonic KX-UT248-B Administration Manual Download Page 110

SRV lookup Prefix for TCP

Description

Specifies a prefix to add to the domain name when performing a DNS
SRV lookup using TCP.

Note

•

This setting is available only when 

[Enable DNS SRV

lookup]

 is set to 

[Yes]

.

Value Range

Max. 32 characters

Default Value

_sip._tcp.

Configuration File Reference

SIP_TCP_SRV_PREFIX_n (Page 253)

4.5.2.8  Transport Protocol of SIP

Transport Protocol

Description

Selects which transport layer protocol to use for sending SIP packets.

Value Range

•

UDP

•

TCP

Default Value

UDP

Configuration File Reference

SIP_TRANSPORT_n (Page 260)

4.5.2.9  Timer Settings

T1 Timer

Description

Selects the default interval, in milliseconds, between transmissions of
SIP messages. For details, refer to RFC 3261.

Value Range

•

250

•

500

•

1000

•

2000

•

4000

Default Value

500

Configuration File Reference

SIP_TIMER_T1_n (Page 250)

T2 Timer

Description

Selects the maximum interval, in seconds, between transmissions of
SIP messages. For details, refer to RFC 3261.

110

Administrator Guide

Document Version    2012-06

4.5.2 SIP Settings [Line 1]–[Line x]

Summary of Contents for KX-UT248-B



















































































































































































































































































































Reviews:

No comments