3
to transfer to an outside telephone
(may not be available).
•
Next enter the outside line access
number and the desired outside
telephone number (including area
code if needed).
4
to transfer to a Custom Service, then
enter the desired Custom Service
number.
5
to activate Voice Mail Service.
6
to activate Automated Attendant
Service (Call Transfer Service).
7
to activate paging.
8
to repeat the greeting.
9
to transfer to the operator.
6.
2
to accept.
7.
Go on-hook.
Deleting Options from Your Personal
Custom Service
1.
Log in to your mailbox.
•
See 2.1 Logging in to Your Mailbox
if necessary.
2.
3
8
1
3.
Press the desired dialling key (0, 3–9)
that you want to delete an option from.
4.
3
5.
Go on-hook.
To Select the No DTMF Input
Operation
1.
Log in to your mailbox.
•
See 2.1 Logging in to Your Mailbox
if necessary.
2.
3
8
1
3.
1
to select the No DTMF Input
Operation.
4.
1
5.
1
for message recording.
2
to disconnect the caller.
3
for disconnect the caller after hours
(message recording for all other times).
6.
2
to accept.
7.
Go on-hook.
To Confirm the Settings for Your
Personal Custom Service
1.
Log in to your mailbox.
•
See 2.1 Logging in to Your Mailbox
if necessary.
2.
3
8
3.
2
to review.
4.
Go on-hook.
Note
•
The System Administrator or the
System Manager must enable
Transfer to Outside for your mailbox
before it can be used.
•
The Transfer to Outside option can
be used a maximum of 4 times in
your Personal Custom Service.
•
Intercom Paging is only available
with Panasonic KX-T series PBXs
using APT or DPT Integration. For
more information, consult your
System Administrator.
•
If your PBX uses PRI lines, you may
need to enter [#] at the end of outside
telephone numbers. For more
information, consult your System
Administrator.
50
Subscriber’s Manual
Document Version 3.0 2010/07
5.18 Personal Custom Service
