Panasonic KX-TVA50 Installation Manual Download

Page: 79 / 208

2.15.2 Wall Mounting the AC Adaptor

Mounting on Wooden Wall

Place the AC adaptor wall mounting template (found later in this section) on the wall to mark the locations
where the 2 screws need to be placed.

KX-TVA50

KX-TVA200

83 mm

(3-1/4 in.)

110 mm

(4-5/16 in.)

Install the screws and washers (included) in the wall.

Washer

Drive the screw

to this position.

Note

•

Drive the screws into the wall until each screw head is the same distance from the wall.

•

Install the screws perpendicular to the wall.

Mount the AC adaptor as shown.

Document Version 3.0 2010/06

Installation Manual

2.15.2 Wall Mounting the AC Adaptor

Summary of Contents for KX-TVA50

















































































































































































































Search results

Summary of Contents for KX-TVA50

Reviews:

Related manuals for KX-TVA50

Brands by name

Popular brands

Panasonic KX-TVA50, Installation Manual

Search results

Summary of Contents for KX-TVA50

Reviews:

Related manuals for KX-TVA50

Brands by name

Popular brands