Panasonic KX-TVA50, Installation Manual

Page: 131 / 208

• Reconnect Sequence on No Answer
Tells the VPS how to return to the caller if the called extension does not answer. PBXs differ in how they
handle this function. Test from an SLT to determine the sequence.
• Reconnect Sequence on Refuse Call
Tells the VPS how to return to the caller if the called extension’s owner has enabled Call Screening to not
take the call. PBXs differ in how they handle this function. Test from an SLT to determine the sequence.
• Light-On Sequence for Message Waiting Lamp
This is the dialing sequence that the VPS must use to turn on a message waiting lamp at an extension.
• Light-Off Sequence for Message Waiting Lamp
This is the dialing sequence that the VPS must use to turn off a message waiting lamp at an extension.
• Message Waiting Lamp Retry Time
Specifies the number of times to retry the Message Waiting Lamp light-on/light-off process. This parameter
is enabled only when the integration mode is Inband Integration or No Integration.
• Message Waiting Lamp Interval Time
Specifies the time between retries for the Message Waiting Lamp light-on/light-off process. This parameter
is enabled only when the integration mode is Inband Integration or No Integration.
• Call Waiting Sequence
This sequence is carried out by the VPS to perform call waiting when the called extension is busy. PBXs
differ in how they handle this function. Test from an SLT to determine the sequence.
• Release Sequence for Call Waiting
This sequence is carried out by the VPS to release call waiting. PBXs differ in how they handle this function.
Test from an SLT to determine the sequence.
• Receiving Caller ID
Enables or disables the VPS to receive Caller ID from the PBX while receiving a call.
• Waiting Time for Receiving Caller ID
Specifies the length of time that the VPS waits before receiving Caller ID from the PBX.
Document Version 3.0 2010/06 Installation Manual 131
5.2.3 PBX Parameters