manualshive.com logo in svg

Panasonic KX-TVA200, Programming Manual

The Panasonic KX-TVA200 Subscriber's Manual is a comprehensive guide that helps you understand and utilize the features of this powerful communication system. This informative manual is available for free download from our website, ensuring easy access to essential information that enhances your user experience.

Share
Download
background image

Default

None

Value Range

2–5 digits

Feature Manual References

2.2.2  Auto Forwarding

Delay Time

Specifies the length of time in hours and minutes that the VPS waits before forwarding unplayed messages.
The maximum delay time is 99 h, 59 min.

Note

•

The delay time must be shorter than the New Message Retention Time, or else messages will be
deleted before being forwarded.

Default

00:30

Value Range

00:05–99:59

Feature Manual References

2.2.2  Auto Forwarding

Forwarding Mode

Specifies if forwarded messages are to be retained in the original mailbox. When set to "Copy", copies of the
messages are retained in the original mailbox after forwarding. When set to "Move", messages are forwarded
to the receiving mailbox and are not retained in the original mailbox.

Default

Move

Value Range

Copy, Move

Feature Manual References

2.2.2  Auto Forwarding

Document Version  3.0  2010/06

Programming Manual

65

2.1.6 Auto Forwarding

Summary of Contents for KX-TVA200





























































































































































































































Reviews:

No comments

Related manuals for KX-TVA200

Orchid Telecom 416+ Programming & User Manual preview
416+
Brand: Orchid Telecom Pages: 25
Toshiba Perfecptione Installation And Maintenance Manual preview
Perfecptione
Brand: Toshiba Pages: 368
Panasonic KX-NS300 Getting Started preview
KX-NS300
Brand: Panasonic Pages: 60

Brands by name

Popular brands

Load more brands