15
Preparation
Voice Mail Tone
If your voice mail service offers the option to send a voice mail tone after a
new message has been recorded in your mailbox, set to “ON”. “
” icon
will flash on the display if a new message has been recorded in your
mailbox. You will hear a series of voice mail tones then a dial tone after
lifting the handset.
(Contact your service provider about your service as it requires a
subscription.)
Set to “OFF” when:
— you do not subscribe to a voice mail service.
— your voice mail service does not send a voice mail tone, or
— the unit is connected to PBX.
Your phone comes from factory set to “ON”.
Make sure that the handset is on the cradle and the SP-PHONE/
HEADSET indicator light is off.
1
Press
[FUNCTION/EDIT]
.
2
Scroll to “
Program ?
” by pressing
[
4
]
or
[
3
]
. Press
[OK]
(
Yes
key).
3
Scroll to “
VM tone detect ?
” by
pressing
[
4
]
or
[
3
]
.
4
Press
[OK]
(
Yes
key).
5
Select “
On
” or “
Off
” by pressing
[
4
]
or
[
3
]
. (Example: “
On
” is selected.)
6
Press
[OK]
(
Save
key).
• A long beep sounds.
• The display will return to step 3. To exit
the programming mode, press
[EXIT]
or
wait for 60 seconds.
• You can exit the programming mode any time by pressing
[EXIT]
.
VM tone detect ?
34
[OK]=Yes
VM tone detect
:On
34
[OK]=Save
TS600CW_B02.book Page 15 Tuesday, January 24, 2006 10:57 AM