![background image](http://html.mh-extra.com/html/panasonic/kx-ts600cb/kx-ts600cb_operating-instructions-manual_279823010.webp)
Settings
10
8
Press
[#]
to select “AM”, “PM” or 24-hour
clock.
(Example: You select “PM”.)
• Each time you press
[#]
, the selection will
change on the display.
9
Press
[OK]
(
Next
key).
10
Enter the current month and day using
a 4-digit number.
(Example: To set Dec. 27, enter “1227”.)
11
Press
[OK]
(
Save
key).
• A long beep sounds.
• The clock starts working.
• The display will return to step 2. To exit
the programming mode, press
[EXIT]
or
wait for 60 seconds.
• You can go back to the previous screen by pressing
[
3
]
, when setting the time
and date (steps 4 through 10).
• If 3 beeps sound when entering the time and date, the time and date entered are
not correct. Enter the correct time and date.
If the batteries installed in the unit expired, the time and date will be shown as
“
12:00AM 12/31
” or “
0:00 12/31
”, and “
” will flash. Replace the batteries
then adjust the time and date.
For Call Display service users (p. 19)
If a time display service is available with the Call Display service:
• The Call Display information will re-set the clock after the ring if the adjusted
time and/or date is incorrect and when the Time Adjustment is set to ON
(p. 14). If the time/date has not previously been set, the Call Display
information will not adjust the clock.
#=AM/PM/24H
PM
34
[OK]=Next
Display
Option
24-hour clock
24H
AM
PM
PM
AM
Enter month/day
12/31
3
[OK]=Save
Enter month/day
12/27
3
[OK]=Save
TS600CW_B02.book Page 10 Tuesday, January 24, 2006 10:57 AM