Panasonic KX-TS3282B Operating Instructions Manual Download

Page: 61 / 76

Useful Information

For assistance, please call: 1-800-211-PANA(7262)

Optional Headset

Plugging an optional headset into the unit allows a hands-free phone
conversation. Please use only a Panasonic KX-TCA60, KX-TCA86,
KX-TCA88, KX-TCA91 or KX-TCA92 headset. To order, call the
accessories telephone number on page 3.

Connecting the Optional Headset to the Unit

Connect the optional headset to the headset jack as shown below.

• The illustration of the headset is KX-TCA88.

Making/Answering Calls

Press [SP-PHONE/HEADSET] to make or answer a call.

• If you misdial when making a call, press [SP-PHONE/HEADSET] twice

and dial again.

• You can press the line button, instead of pressing [SP-PHONE/HEADSET].

To hang up, press [SP-PHONE/HEADSET].

To adjust the headset receiver volume (4 levels):

While using the headset, press VOLUME [ ] or [ ].

• “

■ ■

” shows one level.

• During a conversation using the headset, you cannot switch the call to the

handset by lifting it off the cradle.

• If you disconnect the optional headset during a conversation with the handset on

the cradle, the call will be switched to the speakerphone.

• During a conversation using the speakerphone, you can switch the call to the

headset by connecting the headset.

If you want to have a normal conversation, disconnect the headset.

Fasten the headset
cord to prevent it from
being disconnected.

Hook

Headset Jack

Summary of Contents for KX-TS3282B













































































Search results

Summary of Contents for KX-TS3282B

Reviews:

Related manuals for KX-TS3282B

Brands by name

Popular brands

Panasonic KX-TS3282B, Operating Instructions Manual

Search results

Summary of Contents for KX-TS3282B

Reviews:

Related manuals for KX-TS3282B

Brands by name

Popular brands