Panasonic KX-TS3282B Operating Instructions Manual Download

Page: 45 / 76

Advanced Operation

For assistance, please call: 1-800-211-PANA(7262)

• When using the Dial Lock (p. 57) or Call Restriction feature (p. 58), you cannot

store an item in a one-touch auto dial button ([M1] to [M3]). 3 beeps will be heard
in step 2.

• You can exit the programming mode any time by pressing [EXIT].
• If a pause is required for dialing, press [PAUSE] where needed. If required, you

can also insert [FLASH] in a phone number. Pressing [PAUSE] or [FLASH]
counts as one digit (p. 52, 53).

To erase a stored number

Press the one-touch auto dial button
([M1], [M2] or [M3]) you want to erase.

• The stored item is displayed with the

button number (#1 to #3).

Press [CLEAR].

• To stop erasing, press

[ ]

(

key).

Press [ENTER] (

Yes

key) or [CLEAR].

• A beep sounds, “

Clear

” is displayed and

the information is erased.

• “

Empty

” is displayed.

Dialing a Stored Number

Lift the handset or press [SP-PHONE/HEADSET] or a line button.

Press the desired one-touch auto dial button ([M1], [M2] or [M3]).

• The stored number is displayed and dialed.

Press the desired one-touch auto dial button ([M1], [M2] or [M3]).

• The stored number is displayed.

Lift the handset or press [SP-PHONE/HEADSET] or a line button.

• You can dial numbers stored in the one-touch auto dial buttons ([M1], [M2] and

[M3]) even if the Dial Lock (p. 57) or Call Restriction feature (p. 58) is on.

John White

234-567-8901

Clear?

=No

ENTER=Yes

▼

Summary of Contents for KX-TS3282B













































































Search results

Summary of Contents for KX-TS3282B

Reviews:

Related manuals for KX-TS3282B

Brands by name

Popular brands

Panasonic KX-TS3282B, Operating Instructions Manual

Search results

Summary of Contents for KX-TS3282B

Reviews:

Related manuals for KX-TS3282B

Brands by name

Popular brands