Panasonic KX-TS3282B Page 25 Operating Instructions Manual Download

Page: 25 / 76

Basic Operation

For assistance, please call: 1-800-211-PANA(7262)

The unit will automatically select a free line when you lift the handset to
make a call. (To change the line selection, see page 55.) To hang up, place
the handset on the cradle.

Using the speakerphone

Press [SP-PHONE/HEADSET].

• The SP-PHONE/HEADSET indicator

lights.

• A free line is automatically selected and

the line indicator lights.

Dial a phone number.

• The dialed number is displayed.
• After a few seconds, the display will show

the length of the call.

• If you misdial, press [SP-PHONE/

HEADSET] and start again from step 1.

When the other party answers, talk into
the MIC (microphone).

To hang up, press
[SP-PHONE/HEADSET].

• The SP-PHONE/HEADSET and the line

indicator lights go out.

• The length of the call will remain on the

display for a few seconds.

• In step 1, you can select a line by pressing a line button whose indicator is not lit,

instead of pressing [SP-PHONE/HEADSET].

[SP-PHONE/HEADSET] and Indicator

[LINE 1] and Indicator

[LINE 2/DATA] and Indicator

[HOLD]

MIC

VOLUME [ ], [V]

12:34PM 11/24[1]

00-00-00

12:34PM 11/24[1]

1234567890

12:34PM 11/24[1]

00-00-12

12:35PM 11/24[1]

00-01-10

Making Calls

Summary of Contents for KX-TS3282B













































































Search results

Summary of Contents for KX-TS3282B

Reviews:

Related manuals for KX-TS3282B

Brands by name

Popular brands

Panasonic KX-TS3282B, Operating Instructions Manual

Search results

Summary of Contents for KX-TS3282B

Reviews:

Related manuals for KX-TS3282B

Brands by name

Popular brands