Panasonic KX-TS3282B Operating Instructions Manual Download

Page: 40 / 76

Directory

Finding Stored Items

Make sure that the handset is on the cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET indicator light is off.

Press [ ] or [ ] to enter the directory
list.

• You can go to the Caller List by pressing

[ ]

(p. 30).

Scroll to the desired item by
pressing [ ] or [ ].

• All directory items are stored in the

order shown on the right.

To search for a name by initial:
(1) Press the dialing button for

the first letter of the desired
name until any name with the
same initial is displayed (see
the Index table below).
Ex. To find “Frank”, press [3]
repeatedly until the first item
under “F” is displayed.

(2) Press [ ] repeatedly until the

name is displayed.

• You can exit the directory list any time by pressing [EXIT].
• If “

No items stored

” is displayed in step 1, the directory is empty. To exit the

directory list, press [EXIT].

• If you do not press any buttons for 60 seconds, the unit will exit the directory list.

Index table

Keys

Index

Keys

Index

[1]

Space, Other symbols, 1

[6]

M, N, O, 6

[2]

A, B, C, 2

[7]

P, Q, R, S, 7

[3]

D, E, F, 3

[8]

T, U, V, 8

[4]

G, H, I, 4

[9]

W, X, Y, Z, 9

[5]

J, K, L, 5

[0]

Directory list

=Caller list

▼

Alphabet letter

Number

Symbol (excluding # and )

# and

Telephone number

(When no name is stored)

Press [ ].

Summary of Contents for KX-TS3282B













































































Search results

Summary of Contents for KX-TS3282B

Reviews:

Related manuals for KX-TS3282B

Brands by name

Popular brands

Panasonic KX-TS3282B, Operating Instructions Manual

Search results

Summary of Contents for KX-TS3282B

Reviews:

Related manuals for KX-TS3282B

Brands by name

Popular brands