Panasonic KX-TS3282B Page 48 Operating Instructions Manual Download

Page: 48 / 76

Intercom

Paging All Extensions

Press [INTERCOM].

• The INTERCOM indicator lights.
• The SP-PHONE/HEADSET indicator

lights and the speakerphone turns on.

Press [PAGE], and after 2 short beeps
announce the page using the MIC or the
handset.

• The other extensions will hear your

paging voice through the speaker after 2
short beeps.

After one of the paged extension
answers, talk into the MIC or the
handset.

• You can only talk with an extension who answers first.

Transferring an External Call to Another
Extension

You can transfer an external call to another extension.

Press [HOLD] to place the call on hold.

• The line indicator light flashes.

Press an extension button ([EXT1] to
[EXT8]) to page.

• If the paged extension does not answer,

press the relevant line button.

If required, wait for the paged extension
to answer, and you can announce the
transfer. If not required, go to step 4.

To complete the transfer, place the
handset on the cradle or press
[SP-PHONE/HEADSET] to hang up.

• Any extensions can take a transferred call by pressing the relevant line button.
• To page all extensions, in step 2, press [INTERCOM] then [PAGE]. Speak into the

MIC or handset. After one of the extensions answers, hang up to complete the transfer.

Intercom

Press EXT1~EXT8

or PAGE

Intercom

Paging [ALL]

Hold

Press EXT1~EXT8

to transfer

Ex. Calling EXT. 2

Intercom

Calling [2]

Summary of Contents for KX-TS3282B













































































Search results

Summary of Contents for KX-TS3282B

Reviews:

Related manuals for KX-TS3282B

Brands by name

Popular brands

Panasonic KX-TS3282B, Operating Instructions Manual

Search results

Summary of Contents for KX-TS3282B

Reviews:

Related manuals for KX-TS3282B

Brands by name

Popular brands