4
For assistance, please visit http://www.panasonic.com/help
Wall Mounting
Drive the screws (not supplied) into the wall. Mount the unit, then slide it down.
Note:
L
Make sure that the wall is strong enough to support the weight of the unit.
Troubleshooting
Problem
Cause/solution
The unit does not work.
L
When the indicators do not light, the AC adaptor is not
connected properly. Check the connections.
L
When the indicators do not light green, move the unit
closer to the base unit.
L
Registration may have been canceled.
Deregister the unit, then re-register.
Deregister:
1
Unplug the AC adaptor, then press and hold
{
PROGRAM
}
.
2
While pressing and holding
{
PROGRAM
}
,
re-connect the AC adaptor.
3
Keep pressing and holding
{
PROGRAM
}
for about
10 seconds until the STATUS indicator flashes
amber. Then release
{
PROGRAM
}
.
Re-register:
Unplug the AC adaptor, then perform
from step 2, “Installation/Registering the range
extender to the base unit”, page 3.
While talking using the
handset, sound cuts in
and out.
L
The handset is out of range. Move the handset closer
to this unit.
The STATUS indicator
continues to light
amber for a while.
L {
PROGRAM
}
was pressed. The unit is in
programming mode. To exit, press
{
PROGRAM
}
again. Do not press
{
PROGRAM
}
, except when
deregistering the unit.
37.0 mm
(1
15
/
32
inches)
Screws
TGA405(option)_(e-e).fm Page 4 Wednesday, March 5, 2014 4:56 PM