background image

6

For assistance, please visit http://www.panasonic.com/help

Important safety instructions

When using your product, basic safety precautions should always be followed to reduce the risk 
of fire, electric shock, and injury to persons, including the following:

SAVE THESE INSTRUCTIONS

For best performance

Range extender location/avoiding noise

The range extender and other compatible Panasonic units use radio waves to communicate with 
each other.

L

For maximum coverage and noise-free communications, place your range extender:

– at a convenient, high, and central location with no obstructions between the handset and 

range extender in an indoor environment.

– away from electronic appliances such as TVs, radios, personal computers, wireless devices, 

or other phones.

– facing away from radio frequency transmitters, such as external antennas of mobile phone 

cell stations. (Avoid putting the range extender on a bay window or near a window.)

L

Coverage and voice quality depends on the local environmental conditions.

L

If the reception for a range extender location is not satisfactory, move the range extender to 

another location for better reception.

Environment

L

Keep the product away from electrical noise generating devices, such as fluorescent lamps 

and motors.

L

The product should be kept free from excessive smoke, dust, high temperature, and vibration.

L

The product should not be exposed to direct sunlight.

L

Do not place heavy objects on top of the product.

L

When you leave the product unused for a long period of time, unplug the product from the 

power outlet.

L

The product should be kept away from heat sources such as heaters, kitchen stoves, etc. It 

should not be placed in rooms where the temperature is less than 0 

°

C (32 

°

F) or greater than 

40 

°

C (104 

°

F). Damp basements should also be avoided.

L

The maximum calling distance may be shortened when the product is used in the following 

places: Near obstacles such as hills, tunnels, underground, near metal objects such as wire 

fences, etc.

L

Operating the product near electrical appliances may cause interference. Move away from the 

electrical appliances.

Routine care

L

Wipe the outer surface of the product with a soft moist cloth.

L

Do not use benzine, thinner, or any abrasive powder.

1. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or 

laundry tub, in a wet basement or near a swimming pool.

2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may 

be a remote risk of electric shock from lightning.

3. Do not use the telephone to report a gas leak in the vicinity of the leak.

4. Use only the power cord indicated in this manual.

TGA405(option)_(e-e).fm  Page 6  Wednesday, March 5, 2014  4:56 PM

Summary of Contents for KX-TGA405













Reviews: