background image

5

For assistance, please visit http://www.panasonic.com/help

For your safety

To prevent severe injury and loss of life/property, read this section carefully before using the 
product to ensure proper and safe operation of your product.

k

WARNING

Power connection

L

Use only the power source marked on the product.

L

Do not overload power outlets and extension cords. This can result in the risk of fire or electric 
shock.

L

Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause 
electric shock and/or excessive heat resulting in a fire.

L

Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power 
outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from 
moisture, etc. resulting in a fire.

L

Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an 
unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has 
stopped emitting and contact us at http://www.panasonic.com/contactinfo

L

Unplug from power outlets and never touch the inside of the product if its casing has been 
broken open.

L

Never touch the plug with wet hands. Danger of electric shock exists.

Installation

L

To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of 
moisture.

L

Do not place or use this product near automatically controlled devices such as automatic doors 
and fire alarms. Radio waves emitted from this product may cause such devices to malfunction 
resulting in an accident.

L

Do not allow the AC adaptor to be excessively pulled, bent or placed under heavy objects.

Operating safeguards

L

Unplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners.

L

Do not disassemble the product.

Medical

L

Consult the manufacturer of any personal medical devices, such as pacemakers or hearing 
aids, to determine if they are adequately shielded from external RF (radio frequency) energy. 
(The product operates in the frequency range of 1.92 GHz to 1.93 GHz, and the RF 
transmission power is 115 mW (max.).)

L

Do not use the product in health care facilities if any regulations posted in the area instruct you 
not to do so. Hospitals or health care facilities may be using equipment that could be sensitive 
to external RF energy.

k

CAUTION

Installation and location

L

The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed 
near the product and is easily accessible.

TGA405(option)_(e-e).fm  Page 5  Wednesday, March 5, 2014  4:56 PM

Summary of Contents for KX-TGA405













Reviews: