background image

3

For assistance, please visit http://www.panasonic.com/help

Installation/Registering the range extender to the base unit

Once the unit is connected to a power outlet in step 3, it automatically goes into 
registration mode (if not already registered).

1

Range extender: Connect the AC adaptor.

L

Use only the supplied Panasonic AC adaptor PQLV219.

2

Base unit: Press and hold

 

{

LOCATOR

}

 

for about 5 seconds.

L

Depending on the base unit, a registration tone sounds.

L

If all registered handsets start ringing, press the same button to stop. Then 
repeat this step.

L

The next step must be completed within 90 seconds.

3

Range extender: Connect the AC adaptor to a power outlet.

L

When the unit is turned on, the STATUS indicator and 

w

 indicator light amber 

for about 2 seconds.

4

Range extender: Confirm that the STATUS indicator and 

w

 indicator light 

green. (The unit is ready for use.)

L

If the indicators do not light green, re-position the unit in a place where the 
indicators light green.

5

Base unit: To exit registration mode, press 

{

LOCATOR

}

.

Note:

L

The AC adaptor must remain connected at all times. (It is normal for the adaptor to 
feel warm during use.)

L

The AC adaptor should be connected to a vertically oriented or floor-mounted AC 
outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight 
of the adaptor may cause it to become disconnected.

L

The unit can support a maximum of 2 handsets at a time.

L

Up to 2 range extenders can be registered to the base unit.

Press plug firmly.

Hook

(120 V AC, 60 Hz)

TGA405(option)_(e-e).fm  Page 3  Wednesday, March 5, 2014  4:56 PM

Summary of Contents for KX-TGA405













Reviews: