Programmable Settings
18
Ringer Tone
You can set the handset ringer to use one of 7 ringer patterns for outside calls.
“Tone 1” to “Tone 3” are bell ringer patterns. “Melody 1” to “Melody 4” are preset
melody patterns. The factory preset is “Tone 1”.
•
You cannot change the ringer tone for intercom calls.
•
If you subscribe to a Distinctive Ring Service from your telephone company with 2
or 3 distinct rings, select a bell ringer pattern (Tone 1 to 3). If you select a melody
pattern, you will not be able to distinguish lines by their ringers.
•
If you select one of the melody ringer patterns, the ringer will continue to sound for
several seconds if:
— the caller hangs up before you answer the call, or
— another person answers the call using another phone connected on the same
line.
1
Press
[MENU]
.
2
Press the soft key (
) at “
Ringer
setting
”.
3
Scroll to “
Ringer tone
” by pressing
[
d
]
or
[
B
]
, then press the soft key (
).
4
Select the desired ringer tone by pressing
[
d
]
or
[
B
]
.
•
The handset will ring and the ringer tone will
change. If the ringer volume has been turned off,
the handset will not ring (p. 17).
•
You can also select the ringer tone by pressing
[1]
to
[7]
.
5
Press the soft key (
), then press
[OFF]
.
Handset
SELECT
Ringer setting
SELECT
Ringer tone
Ringer tone
1:Tone 1
SAVE
TG5200CE.fm.fm Page 18 Tuesday, March 23, 2004 11:37 AM
