Panasonic KX-TG5200C Operating Instructions Manual Download | Manualshive

Page: 56 / 64

background image

56

If the Following Appears on Your Display...

The following will be displayed when the unit needs your attention.

Display message

Cause & Remedy

Recharge battery

•

The battery needs to be charged. Recharge the
battery (p. 12).

Charge for 6 HRS

•

The battery has been discharged. The handset will
not work. Fully charge the battery (p. 11).

No link to base.

Move closer to

base and try

again.

•

The handset has lost communication with the base
unit. Walk closer to the base unit, and try again.

•

Confirm that the base unit’s AC adaptor is plugged in.

•

Raise the base unit antennas.

•

The handset’s registration may have been cancelled.
Re-register the handset (p. 54, 55).

Please lift up

and try again.

•

A handset button was pressed while the handset was
on the base unit (or charger, for accessory handset
users, p. 3). Lift the handset and press the button
again.

Busy

•

The called handset is in use.

•

Privacy mode is on for the call you tried to join
(p. 42).

•

The handset you tried to send phone book items to is
in use.

•

The handset you are calling is too far from the base
unit.

Invalid

•

The called handset has not been registered to the
base unit.

•

You selected your own extension number.

Error!!

•

When you tried to register or deregister the handset,
the handset and base unit could not link for some
reason, such as interference from electrical
appliances. Move the handset and base unit away
from any electrical appliances and try again.

•

If more than one handset is in use, you may not be
able to register/deregister. Try again later.

•

Another handset tried to send phone book items to
you but copying stopped. Have the other handset
user re-send the items to you (p. 34, 35).

System is busy.

Please try again

later.

•

If more than one other user is using the handset and/
or base unit, such as conducting outside/intercom
calls, you may not be able to use the handset. Try
again later.

•

The handset has lost communication with the base
unit. Walk closer to the base unit and try again.

TG5200CE.fm.fm Page 56 Tuesday, March 23, 2004 11:37 AM

«
...
54
55
56
57
58
...
»

Summary of Contents for KX-TG5200C

































































Reviews:

No comments

Related manuals for KX-TG5200C

Connect 5t Titanium Black

Brand: Jabra Pages: 2

Brand: Jabra Pages: 13

Brand: Tracer Pages: 58

Brand: Sony Ericsson Pages: 95

Brand: Chinavision Pages: 12

Brand: Bragi Pages: 4

Motion Office MS

Brand: Jabra Pages: 2

Brand: Depaepe Telecom Pages: 4

Elite Sport CPB050

Brand: Jabra Pages: 27

Brand: Panacom Pages: 20

H5450RE3 - Cordless Extension Handset

Brand: RCA Pages: 76

Brand: Jabra Pages: 23

Brand: GN Pages: 19

Brand: ENHANCE Pages: 16

Brand: ActionTec Pages: 21

Brand: Snom Pages: 32

Brand: Blumax Pages: 14

HyperX Cloud Stinger 2

Brand: Hyper Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands