Panasonic KX-TG5100M Operating Instructions Manual Download Page 66

Page: 66 / 84

Canceling Registration/Re-registration

Canceling the Handset Registration

If you no longer need to use the handset or if you want to use the handset with a
different base unit of the same model, it is necessary to cancel the registration from
the current base unit.
Only one handset can be canceled at a time

near the base unit

Make sure the handset and the base unit are not being used.

• “

[-]

” is shown on the top right of the display.

• After canceling registration, the handset cannot be used. If you want to use it

again, register the handset to the base unit by performing steps 5 and 6 on
page 67.

Press

[CONF/FUNCTION]

Scroll to “

Initial setting

” by pressing

[ ]

, then press

[ ]

Scroll to “

Registration

” by pressing

[ ]

, then press

[ ]

Scroll to “

Deregistration

” by pressing

[ ]

, then press

[ ]

Press

[3][3][5]

to delete the registration

memory.

• If you make a mistake, press

[HOLD] (CLEAR)

then enter “335”.

Press the soft key (

• The registration memory will be erased on both

the handset and the base unit.

• If 3 beeps sound, you entered a wrong code.

Enter “335”, then press the soft key (

• To register the handset to another base unit of

the same model, start from step 5 on page 67.

Handset

▼

Initial setting

▼

Registration

▼

Deregistration

Deregistration
Enter code:335
:335

Handset [2]
Deregistered

[-]

Ex. Extension number 2

Summary of Contents for KX-TG5100M





















































































Search results

Summary of Contents for KX-TG5100M

Reviews:

Related manuals for KX-TG5100M

Brands by name

Popular brands

Panasonic KX-TG5100M, Operating Instructions Manual

Search results

Summary of Contents for KX-TG5100M

Reviews:

Related manuals for KX-TG5100M

Brands by name

Popular brands