Panasonic KX-TG5100M Operating Instructions Manual Download

Page: 28 / 84

Answering Calls

When a call is received, the unit rings and “

Incoming call

” is displayed.

Auto Talk

If you set the Auto Talk feature to ON
(p. 20), you can answer a call by lifting the
handset off the base unit or the charger
without pressing

[

]

[

]

Press

[

]

[

]

• You can also answer a call by pressing

any button

except

[ ]

[OFF]

To hang up, press

[OFF]

or place

the handset on the base unit or the
charger.

Press

[DIGITAL SP-PHONE]

Talk into the handset or

MIC

(microphone).

To hang up, press

[DIGITAL SP-

PHONE]

• To transfer the call to another person, see page 42.
• To transfer the call to a mailbox to allow the caller to leave a message,

see page 57.

• When the ringer volume is set to OFF, the unit will not ring (p. 19).

[ ]

[OFF]

Handset

▼

MIC

[DIGITAL SP-PHONE]

and Indicator

Base Unit

Summary of Contents for KX-TG5100M





















































































Search results

Summary of Contents for KX-TG5100M

Reviews:

Related manuals for KX-TG5100M

Brands by name

Popular brands

Panasonic KX-TG5100M, Operating Instructions Manual

Search results

Summary of Contents for KX-TG5100M

Reviews:

Related manuals for KX-TG5100M

Brands by name

Popular brands