Panasonic KX-TG5100M Operating Instructions Manual Download

Page: 56 / 84

Erasing Messages

The unit will announce the remaining recording time after playback, if it is less than
5 minutes. New messages cannot be recorded when:
— “

Memory full

” is heard.

— “

” is displayed on the base unit.

— ANSWER ON indicator flashes rapidly (only when the Answering System is on).

Erase some, or all, of the messages in a mailbox. We recommend you erase
unnecessary messages after each playback.

Erasing a specific message

Press

[ERASE]

while the message you want to erase is being played.

• A short beep will sound and the unit will continue to play the next message.

Press

[ ][4]

while the message you want to erase is being played.

• A short beep will sound and the unit will continue to play the next message.

Erasing all messages in the mailbox

1. Press the soft key (

)

2. Press the soft key (

• If Mailbox 2 or 3 has a password, enter it (p. 51).

3. Press

[ ][5]

to erase all messages in the mailbox.

• A long beep will sound and “

Mailbox (No.)

” and “

No messages

” will be heard.

• To end remote operation, press

[OFF]

Press

[ERASE]

while the base unit is not

being used.

• “

To erase all messages, please select Mailbox

” is

heard.

Within 10 seconds, press the MAILBOX
button (

[MAILBOX 1]

[MAILBOX 2]

[MAILBOX 3]

• If Mailbox 2 or 3 has a password, enter it (p. 51).
• A long beep will sound and “

Mailbox (No.)

” and

“

No messages

” will be heard.

ALL MAILBOX FULL

Base Unit

Handset

Base Unit

Select MAILBOX
to erase all
messages

Mailbox3

All erase

MAILBOX

Ex. Mailbox 3 is selected.

Handset

PLAY

BOX1

BOX2

BOX3

Summary of Contents for KX-TG5100M





















































































Search results

Summary of Contents for KX-TG5100M

Reviews:

Related manuals for KX-TG5100M

Brands by name

Popular brands

Panasonic KX-TG5100M, Operating Instructions Manual

Search results

Summary of Contents for KX-TG5100M

Reviews:

Related manuals for KX-TG5100M

Brands by name

Popular brands