Panasonic KX-TG5100M Operating Instructions Manual Download

Page: 69 / 84

If the Following Appear on Your Display...

Useful Inf

ormation

For assistance, please call: 1-800-211-PANA(7262)

System is busy.

Please try again

later.

• If more than one unit is in use, such as conducting

external/intercom calls or listening to messages, you
may not be able to use another unit. Try again later.

• If you try to program with the handset or base unit

and another user is listening to messages, this
display will be shown. Try again later.

• If 2 other users are listening to messages, or another

user is listening to messages while the Answering
System is responding to a call, you cannot access a
mailbox.

---Incomplete---

Tom Jones

098-765-4321

Phone book full

(The name/number is
an example.)

• When the displayed item is being sent to the

destination unit, the phone book memory is full and
the transfer is stopped. If you tried to send all of the
items, the item displayed with “

Incomplete

” and

items after it have not been transferred to the
destination unit. You can press

[OFF]

on the handset

[STOP]

on the base unit to exit (p. 38, 39). To

erase other stored items from the destination unit
phone book, see page 37. You can send all of the
items again or send the items which have not been
transferred one by one (p. 38, 39).

• If the transfer is stopped and “

Phone book full

” is

not displayed, it may indicate:
– the destination handset is out of area, or
– the destination unit user may have pressed

[

]

[

]

on the handset, or pressed

[DIGITAL SP-

PHONE]

Phone book
No items stored

• Although you tried to send your phone book items to

another extension, your phone book is empty.

Denied

• When you call another unit to monitor, the Room

Monitor mode of the destination unit is set to OFF
(p. 45).

Invalid.

Please register

to the base unit

(handset only)

• The handset you tried to make a call has not been

registered to the base unit. Register the handset
(p. 67, steps 5 and 6).

Greeting record

Recording error

(base unit only)

• “

Your greeting was not recorded. Record your greeting

again.

” is announced. Your greeting was not recorded

correctly. Record it again (p. 21).

Display message

Cause & Remedy

Summary of Contents for KX-TG5100M





















































































Search results

Summary of Contents for KX-TG5100M

Reviews:

Related manuals for KX-TG5100M

Brands by name

Popular brands

Panasonic KX-TG5100M, Operating Instructions Manual

Search results

Summary of Contents for KX-TG5100M

Reviews:

Related manuals for KX-TG5100M

Brands by name

Popular brands