Panasonic KX-tg2248CS Operating Instructions Manual Download Page 51

Page: 51 / 64

Remote Operation from a Touch Tone Phone

Ans

wering System

Voice Menu

The shaded boxes are voice prompts.

• 3 seconds after playback, the voice menu will try again from the beginning.
• The unit will announce the remaining recording time after playback if it is less than

3 minutes.

• If you hear “

Memory full

” after playback, erase unnecessary messages (p. 52).

• If you do not press any buttons within 10 seconds after a voice prompt, “

Thank you

for your call.

” will be heard and the call will be disconnected.

Press 1 to play back new messages.

Press 2 for other functions.

Press 1 to record your message.

Press 2 for other functions.

Press 1 to erase all messages.

Press 2 for other functions.

Press 1 to record your greeting.

Press 2 for other functions.

A long beep sounds and “

messages

” is heard.

Please leave your message.

1. Sp

eak after you hear a long beep.

2. When you finish recording, hang

up.

Press 7 to record your greeting.
Press 9 to end recording.

1. Press

[7]

2. After a long beep, talk for up

to 2 minutes.

3. Press

[9]

to finish.

4. Your greeting will be played

back for confirmation.

New Message Playback.

Only new messages are played
back. At the end of the last
message, “

End of final message

”

is heard.

Press 1 to play back all messages.

Press 2 for other functions.

All Message Playback.

All recorded messages are
played back. At the end of the
last message, “

End of final

message

” is heard.

Press

[1]

Press

[1]

Press

[1]

Press

[1]

Press

[1]

Press

[2]

Press

[2]

Press

[2]

Press

[2]

Press

[2]

✿✤✦✪✤✧✮ ❇ ✤

Summary of Contents for KX-tg2248CS

































































Search results

Summary of Contents for KX-tg2248CS

Reviews:

Related manuals for KX-tg2248CS

Brands by name

Popular brands

Panasonic KX-tg2248CS, Operating Instructions Manual

Search results

Summary of Contents for KX-tg2248CS

Reviews:

Related manuals for KX-tg2248CS

Brands by name

Popular brands