54
Registering Optional Handsets
Registration is necessary for optional handsets. The included handset is
pre-registered at the factory and assigned the handset number 1.
Do not
try to register the handset number 1.
You can register up to 4 handsets at the base unit. Each optional handset
will be assigned a number at registration. The assigned number will be
used as the handset number (p. 56
–
61). Only one handset can be
registered at a time.
Make sure the unit is in the standby mode initially.
1
After charging the handset, the display
on the right will be shown.
2
Enter the 15-digit Base Unit ID code
located on the bottom of the base unit.
•
If you misdial, press
.
Digits are erased from the right.
3
Press .
•
A beep sounds and “
PLEASE WAIT!!
” is
displayed.
4
Wait until a beep sounds on the handset
and base unit.
•
After a few seconds, the handset number
(1 to 4) will be displayed.
•
If “
BASE BUSY TRY LATER
” is displayed in step 4, the unit is in use. Wait until
the unit is in the standby mode, and repeat steps from 2.
•
If “
ENTER BASE ID
” is displayed in step 3, you entered a wrong Base ID code.
Enter the correct code.
)
(
OK
)
(
ENTER BASE ID
###############
O K
R
I
I
PLEASE
WAIT!!
HANDSET 2
R D L
M E M
M E N U
R D L
M E M
M E N U
FOUND
BASE
For Optional Multi-Handset Users
SEARCHING
FOR BASE
N E W
M E N U
R
Summary of Contents for KX-TG1000N - 2.4GHz Cordless Phone
Page 79: ......
