One-Touch Dialer
34
Storing Phone Numbers in the One-Touch
Auto Dial Buttons
You can store up to 3 phone numbers in the one-touch auto dial buttons.
The stored number is dialed with a one-touch operation.
Make sure the base unit is in the standby mode initially.
1
Press and hold one of the one-touch auto dial buttons (
(M1)
to
(M3)
)
until a beep sounds.
2
Enter a phone number, up to 32 digits.
•
If you misdial, wait for 15 seconds until a beep sounds to exit the
programming mode. Repeat from step 1 again.
3
Press the same one-touch auto dial button (
(M1)
to
(M3)
) again.
•
A confirmation beep sounds.
•
To store other numbers, repeat steps 1 through 3.
To erase a stored number
1
Press and hold one of the one-touch auto dial buttons (
(M1)
to
(M3)
)
required until a beep sounds.
2
Press the same one-touch auto dial button (
(M1)
to
(M3)
) again.
•
A confirmation beep sounds.
Do not press any one-touch auto dial buttons before storing to prevent
misoperation.
Summary of Contents for KX-TG1000N - 2.4GHz Cordless Phone
Page 79: ......
