Panasonic KX-TG1000N - 2.4GHz Cordless Phone Operating Instructions Manual Download

Page: 28 / 80

Press

to select

“

CALLS LOG

”, and press .

To search from the most recent call,
press

To search from the oldest call,
press

•

The display shows:
– the caller’s name,
– the caller’s number,
– the time and date of the last call

(ex. Jun. 10, 3:10 AM),

– the call information is new and has not

been viewed (ex. “

” is displayed) and

– the number of the call in the Caller List

(ex. 01).

•

To scroll between callers, press

To exit the list, press and hold

(OFF/CLEAR)

•

The display will return to the standby
mode.

•

If “

CALLS LOG IS EMPTY

” is displayed, the Caller List is not available.

•

If more than one call is received from the same caller, they will be sorted as
separate calls.

)

(

)

(

)

(

)

(

)

(

)

(

)

(

MENU

Using the Caller List

Viewing the Caller List

You can view the caller list with the handset.

Make sure the handset is in the standby mode initially.

CALLS LOG

HANDSET SETTINGS

RANGE EXTENDER

O K

JACK SMITH

1-222-333-4444

3:10A Jun10 N01

C I D

)

(

(OFF/CLEAR)

Display

Function Buttons

Summary of Contents for KX-TG1000N - 2.4GHz Cordless Phone

















































































Search results

Summary of Contents for KX-TG1000N - 2.4GHz Cordless Phone

Reviews:

Related manuals for KX-TG1000N - 2.4GHz Cordless Phone

Brands by name

Popular brands

Panasonic KX-TG1000N - 2.4GHz Cordless Phone, Operating Instructions Manual

Search results

Summary of Contents for KX-TG1000N - 2.4GHz Cordless Phone

Reviews:

Related manuals for KX-TG1000N - 2.4GHz Cordless Phone

Brands by name

Popular brands