manualshive.com logo in svg

Panasonic KX-TG1000N - 2.4GHz Cordless Phone, Operating Instructions Manual

Share
Download
Panasonic KX-TG1000N - 2.4GHz Cordless Phone Operating Instructions Manual Download Page 17

17

Preparation

With the base unit

7 levels are available. Your phone comes from the factory set to level 2.
When set to OFF, the base unit will not ring.

1

Press 

(*)

three times.

•

A beep sounds, POWER and IN USE indicators flash quickly.

2

Press 

VOLUME

Ö

or 

Ñ

to select the desired volume.

•

Each time you press 

VOLUME

Ö

or 

Ñ

, the volume will change 

and ring.

•

To turn the ringer OFF

, press 

VOLUME

Ö

repeatedly until 

no sound is heard.

3

Press 

(#)

.

•

A beep sounds.

To turn the ringer ON, 

press 

VOLUME

Ñ

in step 2.

•

The ringer will sound.

•

You can exit the programming mode any time by pressing 

(*)

.

•

If you do not press any buttons for 15 seconds, the unit will return to the standby
mode.

(*)

VOLUME     ,     

(#)

IN USE Indicator

POWER Indicator

Summary of Contents for KX-TG1000N - 2.4GHz Cordless Phone

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands