45
Advanced Operation
With the base unit
Announced transfer:
1
During a call, press
(HOLD)
then
press
(LOCATOR/INTERCOM)
.
•
The call is put on hold.
2
When the handset user
answers the page, you can
announce the transfer.
•
If the handset user does not answer,
press
(DIGITAL!SP-PHONE)
twice.
3
To end intercom, press
(DIGITAL!SP-PHONE)
.
•
When the handset user presses
(INTERCOM)
, or
(SP-PHONE)
to answer the call,
the transfer is completed.
•
If the handset user does not answer
the transferred call within 5 minutes,
the call will be disconnected.
Blind transfer:
1
During a call, press
(LOCATOR/INTERCOM)
.
•
The call is put on hold.
2
Enter
(1)
•
If the handset user does not answer,
press
(DIGITAL!SP-PHONE)
.
•
When the handset user presses
(INTERCOM)
, or
(SP-PHONE)
to answer the call,
the transfer is completed.
•
If the handset user does not answer,
the ring back tone sounds. If you do
not answer the recall within 30
seconds, the call will be disconnected.
Answering a transferred call with the handset
Announced transfer:
If “
GLOBAL CALL FROM BASE
” is
displayed, press
(INTERCOM)
,
or
(SP-PHONE)
to answer the page.
After the paging party hangs up, you
can talk to the outside caller by
pressing or
(SP-PHONE)
.
Announced transfer:
After the rings, when the other party’s
voice is heard, talk into the
MIC
to
answer the page. After the paging
party hangs up, you can talk to the
outside caller by pressing
(DIGITAL!SP-PHONE)
.
Blind transfer:
If “
TRANSFER FROM BASE
” is
displayed, press
(INTERCOM)
,
or
(SP-PHONE)
to answer the call.
Blind transfer:
After the rings, press
(DIGITAL!SP-PHONE)
to answer the
call.
Answering a transferred call with the base unit
Summary of Contents for KX-TG1000N - 2.4GHz Cordless Phone
Page 79: ......
