4.1.2 V-SIPGW16 Protocol Trace
The trace data of protocol activity can be collected from the V-SIPGW16 card and saved to the PC, using the
utility,
V-SIPGW16 Protocol Trace
.
This option requires that the target V-SIPGW16 card be set to INS status.
Follow the steps below to trace and file V-SIPGW16 card protocol activity:
Note
To access the following menu options, you must be logged in to the Maintenance Console in Batch or
Interactive mode at Installer level. For details about the software mode and access level, refer
to "2.1.1 Starting Maintenance Console and Software Modes" and "2.1.2 Access Levels" in the PC
Programming Manual.
To save trace data to the SD Memory Card
1.
From the
Utility
menu, select
V-SIPGW16 Protocol Trace
.
When the progress bar disappears, the protocol trace is complete. The trace data has been saved to the
SD Memory Card (file name: "PRTSIPC").
To transfer trace data to the PC
1.
From the
Utility
menu, select
File Transfer PBX (SD Card) to PC
.
The list of trace data files will be displayed.
2.
Select the desired trace data file.
3.
Click
Transfer
.
4.
Navigate to the folder in which you want to save the file.
5.
Enter a file name.
6.
Click
Save
.
7.
Click
OK
.
Document Version 2008-11
Programming Manual for Virtual SIP CO Line Card
55
4.1.2 V-SIPGW16 Protocol Trace
