manualshive.com logo in svg

Panasonic KX-TDE600, Programming Manual

The Panasonic KX-TDE600 is a powerful and versatile communication system. To maximize its potential, a Programming Manual is indispensable. You can easily download the manual for free from our website, providing step-by-step instructions and helpful tips to optimize your user experience with this exceptional product.

Share
Download
background image

Value Range

1–65535

3.1.4  NAT

Shelf

Indicates the shelf position (reference only).

Default

Current shelf type

Value Range

Shelf type

Slot

Indicates the slot position (reference only).

Default

Current slot number

Value Range

Slot number

Port

Indicates the port number (reference only).

Default

Current port number

Value Range

Port number

Connection

Indicates the port status.
This column offers two ways to open the screen to select the port command:

•

Click the desired cell in the column.

•

Select the desired cell in the column, and then click 

Command

.

Default

Current status

Value Range

INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.

Document Version  2008-11  

Programming Manual for Virtual SIP CO Line Card

25

3.1.4 NAT

Summary of Contents for KX-TDE600





























































Reviews:

No comments

Related manuals for KX-TDE600

Brands by name

Popular brands

Load more brands