manualshive.com logo in svg

Panasonic KX-TDE600, Programming Manual

The Panasonic KX-TDE600 is a powerful and versatile communication system. To maximize its potential, a Programming Manual is indispensable. You can easily download the manual for free from our website, providing step-by-step instructions and helpful tips to optimize your user experience with this exceptional product.

Share
Download
background image

2.2  Installing the V-SIPGW16 Card to the PBX

1.

a.

Under 

Configuration

, click 

Slot

.

b.

Move the mouse pointer over the white PBX image at the bottom of the screen for the virtual slots.

c.

Click 

Select Shelf

.

2.

a.

Click on the name of the 

V-SIPGW16

 card. An image of the card will be displayed.

b.

Drag the image of the card to a 

Trunk

 slot and release it. The card will move into the slot space.

3.

Click 

Yes

 to confirm.

Document Version  2008-11  

Programming Manual for Virtual SIP CO Line Card

15

2.2 Installing the V-SIPGW16 Card to the PBX

Summary of Contents for KX-TDE600





























































Reviews:

No comments

Related manuals for KX-TDE600

Brands by name

Popular brands

Load more brands