manualshive.com logo in svg

Panasonic KX-TDE600, Programming Manual

The Panasonic KX-TDE600 is a powerful and versatile communication system. To maximize its potential, a Programming Manual is indispensable. You can easily download the manual for free from our website, providing step-by-step instructions and helpful tips to optimize your user experience with this exceptional product.

Share
Download
background image

Channel Attribute

Specifies the channel property of each port to enable several sessions to be performed for one subscription
with the SIP provider.

Default

Not Used

Value Range

Basic channel: The subscriber channel that is assigned the SIP registration information.
Additional channel for ChN (N=1–16): The subordinative channel that uses the same registration information
as a Basic channel for SIP sessions. Select the Basic channel number to which the Additional channel belongs.
Not Used: The channel is not in use.

 Provider Name

Specifies the name of the SIP provider.

Default

Not stored.

Value Range

Max. 20 characters

 SIP Server Location—Name

Specifies the domain name of the SIP proxy server.

Note

Specifies the domain name of the SIP proxy server.

Default

Not stored.

Value Range

Max. 100 characters

 SIP Server Location—IP Address

Specifies the IP address of the SIP proxy server. This setting is compulsory when not using the DNS server.

Note

Specify the IP address of the outbound proxy server, if provided by the SIP provider.

Default

Not stored.

Value Range

1.0.0.0–223.255.255.255

 SIP Server Port Number

Specifies the port number of the SIP proxy server.

20

Programming Manual for Virtual SIP CO Line Card

Document Version  2008-11  

3.1.1 Main

Summary of Contents for KX-TDE600





























































Reviews:

No comments

Related manuals for KX-TDE600

Brands by name

Popular brands

Load more brands